WERTH SYSTEMS PETE 4
Aluminum Potential Equalization Terminal for 4 Devices
- Low touch current - very low contact resistance
- Robust & long-lasting - massive, purified aluminum monobloc housing
- Flexible in use - available with different lengths of Input-cables or with a PE Input Plug
- Easy to clean - compatible with hospital disinfectants
- Easy to install - optional Wall-/ Shelf mount or Rail-/Drip-stand mount
The PETE 4 Potential Equalization Terminal gives you the opportunity to connect all the devices inside a Medical Electrical System to one additional protective earth connection. This can help you to use these Medical Electrical Systems according to the latest norms and regulations, within a patient environment, as described in the actual IEC60601-1.
Why is a Protection against high touch current so important?
Medical devices and devices of a Medical Electrical System, which are used within the patient environment, demand very often an additional potential equalization connection. In combination with a power strip, instructs the IEC60601-1 to use an additional protective earth connection too. This is needed to keep the leakage current low enough and to protect the patient and the user against a too high touch current.
Simple and effective mounting possibilities
The PETE can be mounted, with an additional mounting plate, on nearly every shelf or wall. Furthermore, can the PETE 4 also be mounted on a rail or a drip-stand in combination with an additional clamp.
Available versions and options for the WERTH SYSTEMS PETE 4 Potential Equalization Terminal
With Pin
(Part Number 2001507)
With Cable
1m cable (Part number 2001500) | 3m cable (Part number 2001501) | 5m cable (Part number 2001502)
Mountings
Mounting plate (Part number 2001503) Mounting clamp (Part number 2000705)
Further Products of interest
PES Potential Equalization Socket
Potential equalization socket for installation and compliant with DIN 42801.
PECA Potential Equalization Cable
PECA is our Potential Equalization cable with super flexible single wires, available in different lengths.
PEPS 25 Potential Equalization Pin Set 25mm
PEPS Potential Equalization Pin Installation Set ready to built-in in 25mm length, compliant with DIN 42801 made of nickelized brass material.