WERTH SYSTEMS PEPS-15
Built-in Potential Equalization Pin Installation Set in 15mm length
- Comply with DIN 42801 Norm - connection device for potential equalization conductors
- Long-lasting - resistant to air, water and most diluted acids and bases
- High wear resistance - nickelized brass material
- Ready to built in - complete set with all needed parts for the installation in a device
- Long time availability
The PEPS Potential Equalization Pin Installation Set, with bare brass and nickelized surface, provides a permanent and long-lasting connection, even after thousands of insertion – withdrawal operations. Our PEPS Potential Equalization Pins are available with a threaded bar with 10mm to 25mm and supports up to 50 A current. Above all shall the PEPS tightened with a tightening torque of three Newton meters.
The PEPS-Set includes: 1x Pin, 1x color code washer (green/yellow coated), 1x serrated lock washer (DIN 6798), 1x nut (DIN 439), 1x nut (DIN 934), 1x washer (DIN 125)
Further Products of interest
PES Potential Equalization Socket
Potential equalization socket for installation and compliant with DIN 42801.
PECA Potential Equalization Cable
PECA is our Potential Equalization cable with super flexible single wires, available in different lengths.
PETE 8 Potential Equalization Terminal
PETE Potential Equalization Terminal for eight devices in a monobloc aluminum housing, available in different variations with cable or pin.