emosafe EN-70HD-S Network Isolator

Ultra-compact Medical Gigabit Network Isolator with 5 kV isolation, SnapFit mounting and horizontal RJ45 outlet.

Medical safety: Reinforced isolation according to IEC 60601-1
Gigabit Ethernet: Supports 10 / 100 / 1000 Mbit/s
Enhanced isolation: 5000 V AC / 8500 V DC for 1 minute
Integrated surge protection: TVS diodes protect against transient voltage spikes
Flexible installation: SnapFit mounting with optional installation frames
Made in Germany
Blue gradient abstract graphic with large, white outlined letters forming the word 'NEWS' at a diagonal angle.

In the focus

Secure Isolation. Flexible SnapFit Mounting.

The emosafe EN-70HD-S combines reinforced electrical isolation with a flexible SnapFit mounting interface. Designed for integration into medical electrical devices and housings, it can be installed using optional flush or protruding mounting frames.

Integrated TVS diodes provide additional protection against transient voltage spikes, while the horizontal rear RJ45 socket supports convenient internal cable routing.

Product Description

The emosafe EN-70HD-S Network Isolator provides galvanic isolation for copper-based Ethernet connections in medical electrical devices and systems. It interrupts the conductive connection between network devices, helping prevent equalising currents and protecting patients, operators and connected equipment against external voltages and electrical interference.

The EN-70HD-S supports 10, 100 and 1000 Mbit/s Ethernet and provides reinforced isolation according to IEC 60601-1. Its dielectric strength of 5000 V AC / 8500 V DC is complemented by integrated TVS diodes for additional protection against transient voltage spikes.

Designed for SnapFit mounting, the EN-70HD-S enables secure integration into compatible panels and device housings. Optional installation frames provide flexibility for flush or protruding mounting configurations. The horizontal rear RJ45 socket allows straightforward connection to internal Ethernet cabling without additional power supply or software drivers.

Technical Components

  • Part Number (Werth): 2000750
  • Manufacturer SKU: A10055
  • Isolation type: Reinforced Isolation pulse transformer
  • Surge Protection: Integrated TVS diodes
  • Working Voltage of max. 400 V AC / 450 V DC
  • Dielectric Strength: 5000 V AC / 8500 V DC for 1 minute
  • Supported Transfer rate of 10 / 100 / 1000 MBit/s
  • ISO 11801 Performance Class D
  • RJ45 Jack input & horizontal RJ45 Jack output
  • Typical Insertion Loss: 0.7 dB @ 100 MHz

Sizes & Construction

  • SnapFit panel mounting
  • Ultra-compact housing
  • Approx. 12 g
  • White housing
  • More than 1000 RJ45 mating cycles
  • Protection rating IP40

Standards & Conformity

  • IEC 60601-1
  • Reinforced Isolation, 2 MOPP
  • UL File No. E362969
  • ISO 11801 Class D
  • CE, RoHS
  • IP40 according to EN 60529

More Products

Further Products of interest

Werth Systems IF Tools ISOUSB Plus Box full view
ISOUSB-PLUS Box Isolator
Werth Systems IF Tools ISOUSB Plus Cable isolator checking light on
ISOUSB-PLUS Cable Isolator
RS232 Medical Isolator I1
RS232 Medical Isolator E1

Thank you!

YOUR SUBMISSION WAS SUCCESSFUL

We will contact you as soon as possible with an answer to your request.

Contact us

Do you have questions regarding our products and services? Contact us via phone, E-Mail or use our contact form.

Via Phone & E-Mail

Contact Form

Contact us

Do you have questions regarding our products and services? Please contact us via phone or E-Mail.

Via Phone & E-Mail

Our service hours

You can reach us Monday through Friday as follows: