emosafe EN-50VG-S Network Isolator

EMC-optimised medical Gigabit Network Isolator for panel mounting with vertical internal connection.

IEC 60601-1 compliant and UL Recognized Component
Gigabit Ethernet: supports 10 / 100 / 1000 Mbit/s
EMC-optimised design with Y-Class capacitors and rear ground terminal
Vertical internal RJ45 outlet for space-efficient integration
100% quality control testing
Blue gradient abstract graphic with large, white outlined letters forming the word 'NEWS' at a diagonal angle.

In the focus

EMC Performance in a Space-Efficient Design

The emosafe EN-50VG-S combines the EMC-optimised EN-50 isolation concept with a vertical internal RJ45 outlet. Integrated Y-Class capacitors and a rear ground terminal help reduce electromagnetic interference and gently equalise potential voltage differences while maintaining reinforced electrical isolation.

Product Description

The emosafe EN-50VG-S Network Isolator provides galvanic isolation for copper-based Ethernet connections and is designed for integration into medical electrical devices and systems. It helps protect users and connected equipment against currents caused by potential differences, stray external voltages and power surges.

Its EMC-optimised design uses integrated Y-Class capacitors and a rear-side ground terminal to reduce radiated and received electromagnetic interference without compromising the protective isolation. The EN-50VG-S supports 10, 100 and 1000 Mbit/s Ethernet and meets ISO 11801 Permanent Link Class D performance.

The vertical internal RJ45 connection supports space-efficient integration and cable routing inside the device. Signal transmission is passive, requiring neither an additional power supply nor software drivers.

Technical Components

  • Isolation type: Reinforced Isolation according to IEC 60601-1
  • Working Voltage of max. 250 V AC / 300 V DC
  • Dielectric Strength: 4.0 kV AC / 5.6 kV DC for 60 seconds
  • Supported Transfer rate of 10 / 100 / 1000 MBit/s
  • ISO 11801 Permanent Link Class D
  • Integrated Y-Class capacitors and rear ground terminal for EMC optimisation
  • RJ45 Jack input connector & vertical RJ45 Jack output connector

Sizes & Construction

  • Panel-mount construction
  • Approx. 35 g
  • IP20
  • More than 1000 correct RJ45 mating cycles
  • Operating temperature: +1 °C to +70 °C

Standards & Conformity

  • IEC 60601-1
  • IEC 60601-1-2
  • ANSI/AAMI ES 60601-1
  • CAN/CSA-C22.2 No. 60601-1
  • UL Recognized Component, File No. E362969
  • IEC 60664-1, Overvoltage Category III
  • Low Voltage Directive, EMC Directive, RoHS

More Products

Further Products of interest

Werth Systems IF Tools ISOUSB Plus Box full view
ISOUSB-PLUS Box Isolator
Werth Systems IF Tools ISOUSB Plus Cable isolator checking light on
ISOUSB-PLUS Cable Isolator
RS232 Medical Isolator I1
RS232 Medical Isolator E1

Thank you!

YOUR SUBMISSION WAS SUCCESSFUL

We will contact you as soon as possible with an answer to your request.

Contact us

Do you have questions regarding our products and services? Contact us via phone, E-Mail or use our contact form.

Via Phone & E-Mail

Contact Form

Contact us

Do you have questions regarding our products and services? Please contact us via phone or E-Mail.

Via Phone & E-Mail

Our service hours

You can reach us Monday through Friday as follows: