emosafe EN-10V Network Isolator

Medical Network Isolator for panel mounting with 4 kV isolation, vertical internal connection and optional IP67 protection.

IEC 60601-1 compliant and UL Recognized Component
Reinforced isolation: 4.0 kV AC / 5.6 kV DC for 60 seconds
Flexible integration: vertical internal RJ45 outlet for compact device layouts
Robust connection: optional IP67, touch protection and strain relief with matching accessories
100% quality control testing
Blue gradient abstract graphic with large, white outlined letters forming the word 'NEWS' at a diagonal angle.

In the focus

Isolation & Safety

The emosafe EN-10V provides reinforced isolation in accordance with IEC 60601-1 and is designed for integration into medical electrical devices and systems. Each Network Isolator undergoes extensive quality control before delivery. In combination with the optional Z-1 plug housing, the robust connector can provide touch protection, strain relief and protection up to IP67.

Product Description

The emosafe EN-10V Network Isolator provides galvanic isolation for copper-based Ethernet connections and is designed for panel mounting in medical electrical devices and systems. It disconnects the electrically conducting data and shield connections, helping to prevent currents caused by potential differences and protecting connected equipment and users against stray external voltages and power surges.

The EN-10V supports 10 and 100 Mbit/s Ethernet and provides reinforced isolation with a dielectric strength of 4.0 kV AC / 5.6 kV DC. Signal transmission is passive, so no additional power supply or software drivers are required.

Its vertical internal RJ45 connection is particularly suitable for compact device layouts. When used with optional accessories Z-1 or Z-2, protection up to IP67 can be achieved; Z-1 additionally provides touch protection and strain relief.

Technical Components

  • Article Number: A10008
  • Isolation type: Reinforced Isolation according to IEC 60601-1
  • Working Voltage of max. 250 V AC / 300 V DC
  • Dielectric Strength: 4.0 kV AC / 5.6 kV DC for 60 seconds
  • Supported Transfer rate of 10 / 100 MBit/s
  • ISO 11801 Permanent Link Class C
  • RJ45 Jack input connector & vertical RJ45 Jack output connector

Sizes & Construction

  • Panel-mount construction with panel cut-out and screw fastening
  • Approx. 25 g
  • Black plastic housing
  • More than 250 RJ45 mating cycles
  • IP20, up to IP67 with optional Z-1 / Z-2 accessories
  • Operating temperature: -10 °C to +70 °C

Standards & Conformity

  • IEC 60601-1
  • IEC 60601-1-2
  • ANSI/AAMI ES 60601-1
  • CAN/CSA-C22.2 No. 60601-1
  • UL Recognized Component, File No. E362969
  • Low Voltage Directive, EMC Directive, RoHS

More Products

Further Products of interest

Werth Systems IF Tools ISOUSB Plus Box full view
ISOUSB-PLUS Box Isolator
Werth Systems IF Tools ISOUSB Plus Cable isolator checking light on
ISOUSB-PLUS Cable Isolator
RS232 Medical Isolator I1
RS232 Medical Isolator E1

Thank you!

YOUR SUBMISSION WAS SUCCESSFUL

We will contact you as soon as possible with an answer to your request.

Contact us

Do you have questions regarding our products and services? Contact us via phone, E-Mail or use our contact form.

Via Phone & E-Mail

Contact Form

Contact us

Do you have questions regarding our products and services? Please contact us via phone or E-Mail.

Via Phone & E-Mail

Our service hours

You can reach us Monday through Friday as follows: