The Made in Germany REOMED ISOMONITOR is a safety device, which is used for protection against Isolation failures, such as residual-current circuit-breakers used in domestic installations, although it cannot detect isolation breakdowns on the secondary side of the isolating Transformers. Furthermore, it monitors the dielectric resistance between both of the live output-socket terminals of the Isolation Transformer and earth potential and generates an acoustic and optical signal in the event of a fault condition.
Technical Information REOMED ISOMONITOR Isolation Monitor
Technical Components
- Part Number 230V: 2000702
- Nominal mains voltage of 230 V
- Working range of 200 - 240 VAC
- Response value ≤ 50 kΩ
- Response time < 2 sec.
Sizes & Measurement
- 192 x 34 x 56 mm (H x W x D)
Norms & Conformity
- IEC 60601-1-2 (ed 4.0) in combination with a REOMED Isolation Transformer by EN 60601-1 & En 60601-1-2
- Electric Safety Class II
- IP20
Perfectly attuned to each other: Isomonitor & isolation Transformers by REOMED
The ISOMONITOR is especially and solely developed for the REOMED Isolation Transformers to provide safe power supply of medical diagnosis and analysis devices, systems for therapy and surgery, ECG, Ultrasound, IT Equipment and video systems. In our assortment, we offer a large selection of Isolating Transformers with a rated output of 300 VA to 2200 VA. Discover the right product for your requirements in our broad product range.
Available options of the corresponding REOMED A-50 Series Isolation Transformers
REOMED 600VA A-50W Series Isolation Transformer
Medical certified medical isolation transformer 600 VA Nominal Output Power
REOMED 1000VA A-50W Series Isolation Transformer
Medical certified medical isolation transformer 1000 VA Nominal Output Power
REOMED 2200VA A-50W Series Isolation Transformer
Medical certified medical isolation transformer 2200VA Nominal Output Power
Further Products of interest
WERTH SYSTEMS CMP-2450
WERTH SYSTEMS CMP-2450 All-in-One-PC is our 23,8″ fanless and extendible medical panel pc in a durable and cleanable aluminum case with PCT-Touch-Glass front and a PCIe x16 Slot for additional Cards.
WERTH SYSTEMS PXE-2250
The WERTH SYSTEMS PXE-2250 is fanless 21.5″ medical Panel PC in a closed aluminum case and with full flat IP65 PCT-Touch-Glass-Front. Made for those looking for a high-quality, robust device without a lot of bells and whistles.
WERTH SYSTEMS ST-1050
The WERTH SYSTEMS TT-2050 Medical Computer is our fanless medical pc workstation for high performance application, and it can be equipped with an AI Card or Graphic Card with up to 50 Watt TDP. We have designed a fanless heatpipe cooling system for various PCIe Cards.