emosafe EN-100C Network Isolator

Medical Gigabit Network Isolator for direct PCB assembly with reinforced isolation and solder pad connections.

Medical safety: Reinforced isolation according to IEC 60601-1
Gigabit Ethernet: Supports 10 / 100 / 1000 Mbit/s
Enhanced isolation: 4600 V AC / 8500 V DC for 1 minute
Integrated ESD protection: TVS diodes for supplementary transient protection
Direct PCB integration: Solder pad connections for permanent installation
Durable: 3-year warranty
Blue gradient abstract graphic with large, white outlined letters forming the word 'NEWS' at a diagonal angle.

In the focus

Direct PCB Integration. Reliable Isolation.

The emosafe EN-100C is designed for direct integration into medical electronic devices and systems. Its solder pad connections allow the Network Isolator to be incorporated directly into the printed circuit board, without requiring external RJ45 connectors.

With reinforced isolation according to IEC 60601-1 and integrated TVS protection, the EN-100C combines electrical safety with compact, reliable Gigabit Ethernet performance.

Product Description

The emosafe EN-100C Network Isolator provides galvanic isolation for copper-based Ethernet connections and is specifically designed for direct integration into printed circuit boards of medical electrical devices and systems. It helps prevent equalising currents and protects connected equipment and users against external voltages and electrical interference.

The EN-100C supports data transfer rates of 10, 100 and 1000 Mbit/s and provides reinforced isolation according to IEC 60601-1. Its dielectric strength of 4600 V AC / 8500 V DC is complemented by integrated TVS diodes for supplementary protection against transient voltage spikes.

Designed for permanent PCB installation, the EN-100C features solder pad connections on both sides, allowing direct electrical integration into the device circuitry. The compact, lightweight construction makes it suitable for medical equipment where installation space is limited. No additional power supply or software drivers are required.

Technical Components

  • Manufacturer SKU: A10051
  • Isolation type: Reinforced Isolation according to IEC 60601-1
  • Supplementary ESD Protection: Integrated TVS diodes
  • Working Voltage of max. 400 V AC
  • Dielectric Strength: 4600 V AC / 8500 V DC for 60 seconds
  • Supported Transfer rate of 10 / 100 / 1000 MBit/s
  • ISO 11801 Performance Class D
  • Solder pad input & output connections
  • Typical Insertion Loss: 0.8 dB @ 100 MHz

Sizes & Construction

  • PCB mounting via direct soldering
  • Solder pads on both sides
  • Approx. 6 g
  • Compact, lightweight construction

Standards & Conformity

  • IEC 60601-1
  • Reinforced Isolation
  • UL File No. E362969
  • ISO 11801 Class D

More Products

Further Products of interest

Werth Systems IF Tools ISOUSB Plus Box full view
ISOUSB-PLUS Box Isolator
Werth Systems IF Tools ISOUSB Plus Cable isolator checking light on
ISOUSB-PLUS Cable Isolator
RS232 Medical Isolator I1
RS232 Medical Isolator E1

Thank you!

YOUR SUBMISSION WAS SUCCESSFUL

We will contact you as soon as possible with an answer to your request.

Contact us

Do you have questions regarding our products and services? Contact us via phone, E-Mail or use our contact form.

Via Phone & E-Mail

Contact Form

Contact us

Do you have questions regarding our products and services? Please contact us via phone or E-Mail.

Via Phone & E-Mail

Our service hours

You can reach us Monday through Friday as follows: