emosafe EN-50HG-Y Network Isolator

EMC-optimised medical Gigabit Network Isolator with Y-Con® quick-connect interface for frequently connected mobile devices.

IEC 60601-1 compliant and UL Recognized Component
Gigabit Ethernet: supports 10 / 100 / 1000 Mbit/s
EMC-optimised design with Y-Class capacitors and rear ground terminal
Y-Con® interface: improved retaining strength and reduced accidental touch risk
100% quality control testing
Blue gradient abstract graphic with large, white outlined letters forming the word 'NEWS' at a diagonal angle.

In the focus

Secure Connection for Mobile Medical Devices

The emosafe EN-50HG-Y combines EMC-optimised galvanic isolation with a Yamaichi Y-Con® quick-connect interface. The connection system simplifies frequent plugging and unplugging, improves mechanical retaining strength and reduces the risk of accidental contact with conductive surfaces. It remains compatible with conventional Ethernet connectors.

Product Description

The emosafe EN-50HG-Y Network Isolator provides galvanic isolation for copper-based Ethernet connections and is designed for medical electrical devices and systems where network connections are frequently connected and disconnected. It helps prevent currents caused by potential differences and protects connected equipment and users against stray external voltages and power surges.

Integrated Y-Class capacitors and a rear-side ground terminal improve EMC performance by reducing electromagnetic interference while maintaining the protective isolation. The EN-50HG-Y supports 10, 100 and 1000 Mbit/s Ethernet and provides reinforced isolation according to IEC 60601-1.

The Yamaichi Y-Con® interface increases mechanical retaining strength, simplifies plugging and unplugging and reduces the risk of accidental contact with conductive surfaces. The interface is also compatible with conventional Ethernet connectors. No additional power supply or software drivers are required.

Technical Components

  • Isolation type: Reinforced Isolation according to IEC 60601-1
  • Working Voltage of max. 250 V AC / 300 V DC
  • Dielectric Strength: 4.0 kV AC / 5.6 kV DC for 60 seconds
  • Supported Transfer rate of 10 / 100 / 1000 MBit/s
  • ISO 11801 Permanent Link Class D
  • Integrated Y-Class capacitors and rear ground terminal for EMC optimisation
  • Yamaichi Y-Con® quick-connect interface
  • Horizontal internal RJ45 outlet

Sizes & Construction

  • Panel-mount construction
  • Approx. 35 g
  • IP20
  • More than 1000 correct RJ45 mating cycles
  • Operating temperature: +1 °C to +70 °C

Standards & Conformity

  • IEC 60601-1
  • IEC 60601-1-2
  • ANSI/AAMI ES 60601-1
  • CAN/CSA-C22.2 No. 60601-1
  • UL Recognized Component, File No. E362969
  • IEC 60664-1, Overvoltage Category III
  • Low Voltage Directive, EMC Directive, RoHS

More Products

Further Products of interest

Werth Systems IF Tools ISOUSB Plus Box full view
ISOUSB-PLUS Box Isolator
Werth Systems IF Tools ISOUSB Plus Cable isolator checking light on
ISOUSB-PLUS Cable Isolator
RS232 Medical Isolator I1
RS232 Medical Isolator E1

Thank you!

YOUR SUBMISSION WAS SUCCESSFUL

We will contact you as soon as possible with an answer to your request.

Contact us

Do you have questions regarding our products and services? Contact us via phone, E-Mail or use our contact form.

Via Phone & E-Mail

Contact Form

Contact us

Do you have questions regarding our products and services? Please contact us via phone or E-Mail.

Via Phone & E-Mail

Our service hours

You can reach us Monday through Friday as follows: